Updating bios without a floppy
When set to Automatic, all Performance questions (including those in subscreens) are grayed out except for Processor Speed (GHz), Internal Graphics Speed (GHz), Memory Speed (MHz); the following questions are set as follows: Found in the performance section it allows you to quickly and simply choose processor speed (up to 4.6GHz) and memory speed, in excess of 2000MHz. is useful in providing a modicum of data loss prevention by continuously monitoring hard disks for signs of impending failure. One of the key things this does is causes the POST to skip checking all of the extended memory for errors. One disadvantage of enabling this setting, however, is that you do increase the chances of the POST missing and error message.
» Click Here to scan your PC for the latest BIOS and Driver Updates! Do you have a suspicion that the issues may be BIOS related? If you have critical or irreplaceable data, you should enable this BIOS feature and use an S. Luckily, the POST memory test is pretty much useless to detect transient memory errors.
One of the ways is to adjust the QUICK POWER ON SELF TEST setting. Do you really want your system to test the RAM each time you boot up? BIOS updates can also be created to address something small but important, such as adding support for a higher frequency RAM or a new CPU.
Let me tell you that if you have more than 265MB, then no, you don't, because the process can take minutes. It’s best to check periodically with BIOS Agent Plus to see if any new versions of your BIOS have been released.
If problems reoccur, repeat the process until you pinpoint the setting that is causing the problem and make the appropriate change. » Click Here to scan your PC for the latest BIOS and Driver Updates!
If loading the defaults does not correct the problem clear the CMOS by powering off the system, unplugging it, and removing the CMOS battery for 8-10 hours. The Security section of the BIOS can be used to keep unauthorized people from making changes to the BIOS.
If this is the case, these problems can often be resolved by resetting CMOS settings by loading either the default CMOS/BIOS settings, clearing the CMOS, or by upgrading the BIOS. Enter the CMOS setup utility during the startup of your PC. In this issue we are going to discuss the setting State After Power Fail.
Then load the defaults by selecting Load Fail-Safe Defaults, Load BIOS Defaults, or whatever your BIOS manufacturer has named this function in your particular type and version of BIOS. The setting State After Power Fail deals with the state of your system after the system loses power.
Be sure to save your changes before exiting the CMOS Setup. In some systems it may be called Power On After Power Fail. If you set Power On After Power Fail to YES, then when power resumes the system will power on.
Just a simple change of some of the key settings can make dramatic differences in how fast your system boots up. Also, ironically, trying to enter the PC's BIOS may be impossible if this setting is disabled and a USB keyboard is connected.
Enable the "Quick Boot" Feature: Many newer PC's have a special BIOS setting, usually called "Quick Boot" or "Quick Power On Self Test" that can be enabled to make the boot take less time. Capability, these new BIOS will automatically check the hard disk's S. If the PC has a USB keyboard with a rectangular connector, then set this to Enabled .
Search for updating bios without a floppy:
However, it also slows the boot process down, so make sure that it is only enabled if it is needed. This is Boot Sector virus protection which protects the boot sector or partition table of your hard drive.